7.1.5 General settings
Function Selection Factory setting
Select language
Language version A:
Deutsch, English, Français, Italiano
Language version C:
Deutsch, English, Français,
Nederlands, Japanese
English
Input damping
1)
(size of time window over which
measurement is averaged;
2 measured values per second)
Filter length, 0 (= off) ... 30 0
Temperature unit
Celsius [°C]
Fahrenheit [°F]
Kelvin [K]
Celsius [°C]
Set date Weekday, day, month, year
Set time Hour, minute
Tag number (max. 32 chars.)
(measuring point designation)
0 ... 9; A ... Z
Display contrast (E+H logo) Set for optimum view
1)
Input damping:
To increase immunity of measurement to interference, a continuous input damping function can
be switched on in the form of an input filter (averaging function). The filter length must be
adapted by trial and error to the process so that, although transients are suppressed, any
actual changes in the measured value are recorded.
Instrument configuration Mycom CLM 152
40 Endress+Hauser
To Next Page
Loading...
