Endress+Hauser Nivector FTI26 - Page 14

Installation Nivector FTI26
14 Endress+Hauser
A
!B
!C
A
C - B
<
=
1
A0036363
 8 Installation with Tri-Clamp, which can be ordered as an accessory, and with NA Connect adapter
provided by customer
A Distance between Tri-Clamp and NA Connect adapter
B Diameter of Nivector
C Diameter of NA Connect adapter
Installation with protector
• Protection of point level switch against damage by particularly abrasive or coarse product
• Outflow protection in silo for functional testing when silo is full
≥20 (0.8)
G 1½"
A0036361
 9 Installation with protector, can be ordered as an accessory
Take account of metallic or non-metallic vessels in accordance with EMC guidelines, see
Technical Information TI01384F.
5.2.3 Protection cover for hazardous areas
L
WARNING
Damage to the device from impact.
‣
The protection cover must be fitted before the device is put into operation.