Endress+Hauser Proline Promag 10 - Function Matrix and Basic Operation

PROline Promag 10 5Operation
Endress+Hauser 49
5.2 Brief guide to the function matrix
!
Note!
• Please refer to the general notes on Page 50.
• Function matrix overview → Page 92
• Detailed description of all functions → Page 93 ff.
The function matrix is a two-level construct: the groups form one level and the groups'
functions the other. The groups are the highest-level grouping of the control options for
the measuring device. A number of functions is assigned to each group.
You select a group in order to access the individual functions for operating and
configuring the measuring device.
Example of how to configure a function (in this case changing the language for the UI):
1. HOME position → F → Enter the function matrix
2. Select a function group (e.g.USER INTERFACE)
3. Select a function (e.g. LANGUAGE)
Change parameters / enter numerical values:
OS → Select or enter release code, parameters, numerical values (e.g. change
language from English to German)
F → Save entries
4. Exit the function matrix:
– Press and hold down the Esc key (X) for more than 3 seconds → HOME position
– Repeatedly press Esc key (X) → Return step by step to HOME position
Fig. 36: Selecting and configuring functions (function matrix)
>3s
-
+
E
Esc
E
E
E
E
E E E E E
–
+
➁
➃
➂
➀
+
Esc
–
+
Esc
–
+
Esc
–
E