PROline Promag 10 7 Maintenance
Endress+Hauser 63
7 Maintenance
The Promag 10 flowmeter system requires no special maintenance.
Exterior cleaning
When cleaning the exterior of measuring devices, always use cleaning agents that do
not attack the surface of the housing and the seals.
Seals
The seals of the Promag H sensor must be replaced periodically, particularly in the case
of gasket seals (aseptic version)! The period between changes depends on the
frequency of cleaning cycles, the cleaning temperature and the fluid temperature.
Replacement seals (accessory) → Page 64.
To Next Page
Loading...
