Endress+Hauser Proline Promag 10 - Mechanical Construction

PROline Promag 10 10 Technical data
Endress+Hauser 83
Limiting flow see Page 17
Pressure loss • No pressure loss if the sensor is installed in a pipe of the same nominal diameter
(Promag H: only DN 8 and larger).
• Pressure losses for configurations incorporating adapters according to
(E) DIN EN 545 → Page 16
10.1.8 Mechanical construction
Design, dimensions → Page 91
Weight
Promag W weight data in kg
Nominal
diameter
Compact version Remote version (without cables)
[mm] [inch] DIN ANSI Sensor Transmitter
25 1"
PN 40
5.7
Class 150
5.7
PN 40
5.3
Class 150
5.3 3.1
32 1 1/4" 6.4 – 6.0 – 3.1
40 1 1/2" 7.8 7.8 7.4 7.4 3.1
50 2" 9.0 9.0 8.6 8.6 3.1
65 2 1/2"
PN 16
10.4 –
PN 16
10.0 – 3.1
80 3" 12.4 12.4 12.0 12.0 3.1
100 4" 14.4 14.4 14.0 14.0 3.1
125 5" 19.9 – 19.5 – 3.1
150 6" 23.9 23.9 23.5 23.5 3.1
200 8"
PN 10
43.4 43.4
PN 10
43 43 3.1
250 10" 63.4 73.4 63 73 3.1
300 12" 68.4 108.4 68 108 3.1
350 14" 113.4 173.4 113 173 3.1
400 16" 133.4 203.4 133 203 3.1
450 18" 173.4 253.4 173 253 3.1
500 20" 173.4 283.4 173 283 3.1
600 24" 233.4 403.4 233 403 3.1
Promag transmitter (compact version): 1.8 kg
(Weight data valid for standard pressure ratings and without packaging material)