Endress+Hauser Proline Promag 10 - System Configuration

PROline Promag 10 11 Description of Device Functions
Endress+Hauser 93
11.2 Group SYSTEM UNITS
Function description SYSTEM UNITS
Use this function group to select the unit for the measured variable.
UNIT VOLUME FLOW Use this function to select the unit for displaying the volume flow.
The unit you select here is also valid for:
• Volume flow display
• Current output
• Switch points (limit value for volume flow, flow direction)
• Low flow cut off
Options:
Metric:
Cubic centimetre
→ cm
3
/s; cm
3
/min; cm
3
/h; cm
3
/day
Cubic decimetre
→ dm
3
/s; dm
3
/min; dm
3
/h; dm
3
/day
Cubic metre
→ m
3
/s; m
3
/min; m
3
/h; m
3
/day
Millilitre
→ ml/s; ml/min; ml/h; ml/day
Litre
→ l/s; l/min; l/h; l/day
Hectolitre
→ hl/s; hl/min; hl/h; hl/day
Megalitre
→ Ml/s; Ml/min; Ml/h; Ml/day
US:
Cubic centimeter
→ cc/s; cc/min; cc/h; cc/day
Acre foot
→ af/s; af/min; af/h; af/day
Cubic foot
→ ft
3
/s; ft
3
/min; ft
3
/h; ft
3
/day
Fluid ounce
→ oz f/s; oz f/min; oz f/h; oz f/day
Gallon
→ gal/s; gal/min; gal/h; gal/day
Million gallons
→ Mgal/s; Mgal/min; Mgal/h; Mgal/day
Barrel (normal fluids: 31.5 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Barrel (beer: 31.0 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Barrel (petrochemicals: 42.0 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Barrel (filling tanks: 55.0 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Imperial
Gallon
→ gal/s; gal/min; gal/h; gal/day
Mega gallon
→ Mgal/s; Mgal/min; Mgal/h; Mgal/day
Barrel (beer: 36.0 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Barrel (petrochemicals: 34.97 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Factory setting:
Depends on nominal diameter and country
(dm
3
/min...m
3
/h or US-gal/min),
corresponding to the full scale value unit (see Page 116 ff.) factory setting.
UNIT VOLUME Use this function to select the unit for displaying the volume.
The unit you select here is also valid for:
• Totalizer status display
• Totalizer unit
• Pulse value (e.g. m
3
/p)
Options:
Metric
→ cm
3
; dm
3
; m
3
; ml; l; hl; Ml
US
→ cc; af; ft
3
; oz f; gal; Mgal; bbl (normal fluids); bbl (beer);
bbl (petrochemicals)
→ bbl (filling tanks)
Imperial
→ gal; Mgal; bbl (beer); bbl (petrochemicals)
Factory setting:
Depends on nominal diameter and country (dm
3
...m
3
or US-gal),
corresponding to the totalizer unit (see Page 116 ff.) factory setting.