Endress+Hauser PROline promag 53 - 9.3 Process Error Messages

PROline Promag 53 10 Technical data
Endress+Hauser 141
10.5 Dimens ions Promag 53 P
Promag P / ≤ 12" / DN ≤ 300 (compact version)
Fig. 66: Dimensions Promag P / ≤ 12" / DN ≤ 300 (compact version)
DN L A B C K E
DIN
mm
ANSI
inch
inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm)
15 1/2" 7.87 (200) 13.4 (341) 10.1 (257) 3.31 (84) 4.72 (120) 3.70 (94)
25 1" 7.87 (200) 13.4 (341) 10.1 (257) 3.31 (84) 4.72 (120) 3.70 (94)
32
− 7.87 (200) 13.4 (341) 10.1 (257) 3.31 (84) 4.72 (120) 3.70 (94)
40 1 1/2" 7.87 (200) 13.4 (341) 10.1 (257) 3.31 (84) 4.72 (120) 3.70 (94)
50 2" 7.87 (200) 13.4 (341) 10.1 (257) 3.31 (84) 4.72 (120) 3.70 (94)
65
− 7.87 (200) 15.4 (391) 11.1 (282) 4.29 (109) 7.08 (180) 3.70 (94)
80 3" 7.87 (200) 15.4 (391) 11.1 (282) 4.29 (109) 7.08 (180) 3.70 (94)
100 4" 9.84 (250) 15.4 (391) 11.1 (282) 4.29 (109) 7.08 (180) 3.70 (94)
125
− 9.84 (250) 18.6 (472) 12.7 (322) 5.90 (150) 10.2 (260) 5.51 (140)
150 6" 11.8 (300) 18.6 (472) 12.7 (322) 5.90 (150) 10.2 (260) 5.51 (140)
200 8" 13.8 (350) 20.7 (527) 13.6 (347) 7.08 (180) 12.7 (324) 6.14 (156)
250 10" 17.7 (450) 22.7 (577) 14.6 (372) 8.07 (205) 15.7 (400) 6.14 (156)
300 12" 19.7 (500) 24.7 (627) 15.6 (397) 9.05 (230) 18.1 (460) 6.53 (166)
The fitting length (L) is always the same, regardless of the pressure rating.
F06-53Fxxxxx-06-00-xx-xx-000
Dimensions in inches (mm)