Endress+Hauser PROline promag 53 - Page 142

10 Technical data PROline Promag 53
142 Endress+Hauser
Promag P / ≤ 12" / DN ≤ 300 (remote version)
Fig. 67: Dimensions Promag P / ≤ 12" / DN ≤ 300 (remote version)
Dimensions of wall-mount housing
→ see Page 136
DN L A B C K E
DIN
mm
ANSI
inch
inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm)
15 1/2" 7.87 (200) 11.2 (286) 7.95 (202) 3.31 (84) 4.72 (120) 3.70 (94)
25 1" 7.87 (200) 11.2 (286) 7.95 (202) 3.31 (84) 4.72 (120) 3.70 (94)
32
− 7.87 (200) 11.2 (286) 7.95 (202) 3.31 (84) 4.72 (120) 3.70 (94)
40 1 1/2" 7.87 (200) 11.2 (286) 7.95 (202) 3.31 (84) 4.72 (120) 3.70 (94)
50 2" 7.87 (200) 11.2 (286) 7.95 (202) 3.31 (84) 4.72 (120) 3.70 (94)
65
− 7.87 (200) 13.2 (336) 8.94 (227) 4.29 (109) 7.08 (180) 3.70 (94)
80 3" 7.87 (200) 13.2 (336) 8.94 (227) 4.29 (109) 7.08 (180) 3.70 (94)
100 4" 9.84 (250) 13.2 (336) 8.94 (227) 4.29 (109) 7.08 (180) 3.70 (94)
125
− 9.84 (250) 16.4 (417) 10.5 (267) 5.90 (150) 10.2 (260) 5.51 (140)
150 6" 11.8 (300) 16.4 (417) 10.5 (267) 5.90 (150) 10.2 (260) 5.51 (140)
200 8" 13.8 (350) 18.6 (472) 11.5 (292) 7.08 (180) 12.7 (324) 6.14 (156)
250 10" 17.7 (450) 20.5 (522) 12.5 (317) 8.07 (205) 15.7 (400) 6.14 (156)
300 12" 19.7 (500) 22.5 (572) 13.5 (342) 9.05 (230) 18.1 (460) 6.53 (166)
The fitting length (L) is always the same, regardless of the pressure rating.
F06-xxFxxxxx-06-05-xx-xx-000
Dimensions in inches (mm)