Endress+Hauser PROline promag 53 - 9.6 Spare Parts

10 Technical data PROline Promag 53
146 Endress+Hauser
10.6 Dimensions of ground disks (Promag W, P)
Fig. 72: Dimensions of ground disks (Promag W, P / 1/2" to 12" / DN 15 - 300)
DN
1)
A B D H
DIN
mm
ANSI
inch
inch (mm) inch (mm) inch (mm) inch (mm)
15 1/2" 0.75 (19) 1.69 (43) 2.42 (61.5) 2.87 (73)
25 1" 1.18 (30) 2.44 (62) 3.05 (77.5) 3.44 (87.5)
32
− 1.52 (38.5) 3.15 (80) 3.44 (87.5) 3.72 (94.5)
40 1 1/2" 1.75 (44.5) 3.23 (82) 3.98 (101) 4.06 (103)
50 2" 2.22 (56.5) 3.98 (101) 4.55 (115.5) 4.25 (108)
65
− 2.85 (72.5) 4.76 (121) 5.18 (131.5) 4.65 (118)
80 3" 3.35 (85) 5.16 (131) 6.08 (154.5) 5.31 (135)
100 4" 4.33 (110) 6.14 (156) 7.34 (186.5) 6.02 (153)
125
− 5.31 (135) 7.36 (187) 8.13 (206.5) 6.30 (160)
150 6" 6.42 (163) 8.54 (217) 10.1 (256) 7.24 (184)
200 8" 8.29 (210.5) 10.5 (267) 11.3 (288) 8.07 (205)
250 10" 10.4 (265) 12.9 (328) 14.1 (359) 9.45 (240)
300
2)
12"
2)
12.5 (317) 14.8 (375) 16.3 (413) 10.7 (273)
300
3)
12"
3)
12.5 (317) 14.8 (375) 15.9 (404) 10.6 (268)
1)
Ground disks can, with the exception of 12" (DN 300), be used for all flange norms / pressure ratings.
2)
PN 10/16, Class 150
3)
PN 25, JIS 10K/20K
F06-xxxxxxxx-06-09-00-xx-001
Dimensions in inches (mm)