Endress+Hauser PROline promag 53 - 9.6.4 Replacing the Device Fuse

10 Technical data PROline Promag 53
152 Endress+Hauser
Process connections with O-ring seals (DN 1/12" to 1" / 2 - 25)
Weld nipples for IPS pipe
1.4404 / 316L
5*H**-C***********
Sensor Pipe di G L H x B
inch (mm) Tube (ODT / SMS) inch (mm) inch (mm) inch (mm) inch (mm)
1/12 - 5/16
(2 - 8)
0.53 x 0.09
(13.5 x 2.3)
0.35 (9.0) 0.53 (13.5) 0.80 (20.3) 2.36 x 1.65
(60 x 42)
1/2 (15) 0.84 x 0.10
(21.3 x 2.65)
0.63 (16.0) 0.84 (21.3) 0.80 (20.3) 2.36 x 1.65
(60 x 42)
1" (25 ANSI) 1.33 x 0.13
(33.7 x 3.25)
1.07 (27.2) 1.33 (33.7) 0.88 (22.3) 2.76 x 2.05
(70 x 52)
Fitting length = (2 x L) + 3.39" [86 mm]
F06-xxHxxxxx-06-09-07-xx-012
Flange CI 150 / ANSI 16.5
1.4404 / 316L
5*H**-E***********
Sensor Pipe di G L LK M H x B
inch (mm) Flange
inch
inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm)
1/12 - 5/16
(2 - 8)
1/2" 0.62 (15.7) 3.50 (89) 2.60 (66.0) 2.38 (60.5) 0.62 (15.7) 2.36 x 1.65
(60 x 42)
1/2 (15) 1/2" 0.63 (16.0) 3.50 (89) 2.60 (66.0) 2.38 (60.5) 0.62 (15.7) 2.36 x 1.65
(60 x 42)
1" (25
ANSI)
1" 1.05 (26.7) 4.25 (108) 2.83 (71.8) 3.12 (79.2) 0.62 (15.7) 2.76 x 2.05
(70 x 52)
Fitting length = (2 x L) + 3.39" (86 mm)
F06-xxHxxxxx-06-09-07-xx-015
Flange CI 150 / ANSI 16.5
PVDF
5*H**-H***********
Sensor Pipe di G L M LK H x B
inch (mm) Flange
inch
inch (mm) inch (mm) inch (mm) inch (mm) inch (mm) inch (mm)
1/12 - 5/16
(2 - 8)
1/2" 0.62 (15.7) 3.74 (95) 2.24 (57) 0.63 (16) 2.36 (60) 2.36 x 1.65
(60 x 42)
1/2
(15)
1/2" 0.62 (15.7) 3.74 (95) 2.24 (57) 0.63 (16) 2.36 (60) 2.36 x 1.65
(60 x 42)
1" (25
ANSI)
1" 1.07 (27.3) 4.53 (115) 2.24 (57) 0.63 (16) 3.11 (79) 2.76 x 2.05
(70 x 52)
– Fitting length = (2 x L) + 3.39" (86 mm)
– The requisite ground rings can be ordered as accessories (Order No. DK5HR-****)
F06-xxHxxxxx-06-09-07-xx-029