Endress+Hauser PROline promag 53 - Page 154

10 Technical data PROline Promag 53
154 Endress+Hauser
Process connections with aseptic gasket seal (1/12" to 1" / DN 2 - 25 )
Weld nipples for ODT/SMS pipe
1.4404 / 316L
5*H**-V***********
Sensor Pipe di G L H x B
inch (mm) Tub e inch (mm) inch (mm) inch (mm) inch (mm)
1/12 - 5/16
(2 - 8)
0.50 x 0.06
(12.7 x 1.65)
0.37 (9.4) 0.50 (12.7) 0.63 (16.1) 2.36 x 1.65
(60 x 42)
1/2 (15) 0.75 x 0.06
(19.1 x 1.65)
0.62 (15.8) 0.75 (19.1) 0.63 (16.1) 2.36 x 1.65
(60 x 42)
1" (25 ANSI) 0.96 x 0.06
(24.5 x 1.65)
0.87 (22.1) 1.00 (25.4) 0.63 (16.1) 2.76 x 2.05
(70 x 52)
– Fitting length = (2 x L) + 3.39" (86 mm)
– If pigs are used for cleaning, it is essential to take the inside diameters of measuring tube (Page 147)
and process connection (di) into account.
F06-xxHxxxxx-06-09-07-xx-013
Tri-Clamp
1.4404 / 316L
5*H**-1***********
Sensor Pipe di G L H x B
inch (mm) Tr i -C la mp inch (mm) inch (mm) inch (mm) inch (mm)
1/12 - 5/16
(2 - 8)
Tube 12.7 x 1.65
(ODT 1/2")
0.37 (9.4) 0.98 (25.0) 1.12 (28.5) 2.36 x 1.65
(60 x 42)
1/2
(15)
Tube 19.1 x 1.65
(ODT 3/4")
0.62 (15.8) 0.98 (25.0) 1.12 (28.5) 2.36 x 1.65
(60 x 42)
1" (25 ANSI) Tube 24.5 x 1.65
(ODT 1")
0.87 (22.1) 1.98 (50.4) 1.12 (28.5) 2.76 x 2.05
(70 x 52)
– Fitting length = (2 x L) + 3.39" (86 mm)
– If pigs are used for cleaning, it is essential to take the inside diameters of measuring tube (Page 147)
and process connection (di) into account.
F06-xxHxxxxx-06-09-07-xx-020