Endress+Hauser PROline promag 53 - Foundations, Supports

PROline Promag 53 3 Installation
Endress+Hauser 19
3.2.5 Foundations, supports
If the nominal diameter is ≥ 14" (DN ≥ 350), mount the transmitter on a foundation of ade-
quate load-bearing strength.
"
Caution:
Risk of damage. Do not support the weight of the sensor on the metal casing: the casing
would buckle and damage the internal magnetic coils.
Fig. 13: Correct support for large nominal diameters (≥14"/DN ≥ 350)
F06-5xFxxxxx-11-05-xx-xx-000