4 Wiring PROline Promag 53
48 Endress+Hauser
Fig. 28: Connecting the remote version of Promag W/P
a = cover of the connection compartment, b = cover of the sensor connection housing, c = signal cable,
d = coil current cable, n.c. = not connected, insulated cable shields
Fig. 29: Connecting the remote version of Promag H
a = cover of the connection compartment, b = cover of the sensor connection housing, c = signal cable,
d = coil current cable, n.c. = not connected, insulated cable shields
F06-5xFxxxxx-04-xx-xx-en-000F06-5xHxxxxx-04-xx-xx-en-000
To Next Page
Loading...
