PROline Promag 53 2 Identification
Endress+Hauser 9
2 Identification
2.1 Device designation
The “Promag 53” flow measuring system consists of the following components:
• Promag 53 transmitter
• Promag W, Promag P or Promag H sensor
In the compact version, transmitter and sensor form a single mechanical unit; in the
remote version they are installed separately.
2.1.1 Nameplate of the transmitter
Fig. 1: Nameplate specifications for the “Promag 53” transmitter (example)
1 Ordering code/serial number: See the specifications on the order confirmation for the meanings of the
individual letters and digits.
2 Power supply / frequency: 16 - 62 V DC / 20 - 55 V AC / 50 - 60 Hz
Power consumption: 15 VA / W
3 Additional functions and software:
– EPD/MSU: with Empty Pipe Detection
– ECC: with Electrode Cleaning Circuitry
4 Outputs / inputs:
I-OUT (HART): with current output (HART)
f-OUT: with pulse/frequency output
RELAY: with relay output
STAT-IN: with status input (auxiliary input)
5 Reserved for information on special products
6 Ambient temperature range
7 Degree of protection
PROMAG
ENDRESS+HAUSER
Order Code:
53
Ser.No.:
TAG No.:
16-62VDC/20-55VAC
50-60Hz
EPD / MSU
ECC
I-OUT (HART), f-OUT
RELAY, I-IN
Pat. US 5,323,156 5,479,007
Pat. US 4,382,387 4,704,908 5,351,554
15VA/W
IP67/NEMA/Type4XXXXXX-XXXXXXXXXXXX
12345678901
ABCDEFGHJKLMNPQRST
–20°C (–4°F) < Tamb < +60°C (+140°F)
i
1
7
6
2
3
4
5
F06-53xxxxxx-18-06-xx-xx-000
To Next Page
Loading...
