Endress+Hauser PROline promag 53 - T R O U B L E S H O O T I N

8 Accessories PROline Promag 53
98 Endress+Hauser
Ground rings for
Promag H
If the process connections are made of PVC
or PVDF, ground rings are necessary to
ensure that potential is matched.
Set of ground rings, comprising:
– 2 ground rings
–2 seals
DK5HR − * * * *
Set of seals for
Promag H
For regular replacement of the seals of the
Promag H sensor.
DK5HS
− * * *
Wall mounting kit for
Promag H
Wall-mounting kit for the Promag H sensor DK5HM
− * *
Welding jig for
Promag H
Weld nipple as process connection:
welding jig for installation in pipe.
DK5HW
− * * *
HART Communicator
DXR 275 hand-held
terminal
Hand-held terminal for remote parameteriza-
tion and for fetching measured values via the
current output HART (4 to 20 mA).
Contact your E+H representative for more
information.
DXR275
− * * * *
Applicator ™ Software for selecting and configuring flow-
meters.
Applicator™ can be downloaded from the
Internet or ordered on CD-ROM for installation
on a local PC.
Contact your E+H representative for more
information.
DKA80
− *
FieldTool ™ Configuration and service software for flow-
meters in the field:
– Commissioning, maintenance analysis
– Configuring flowmeters
– Service functions
– Visualization of process data
– Troubleshooting
– Controlling the “FieldCheck™” tester/
simulator
Contact your E+H representative for more
information.
DXS10
− * * * * *
FieldCheck ™ Tester/simulator for testing flowmeters in the
field.
When used in conjunction with the
“FieldTool™” software package, test results
can be imported into a database, printed and
used for official certification.
Contact your E+H representative for more
information.
DXC10
− * *
Accessory Description Ordering code