Endress+Hauser PROline promag 53 - Promag H (Measuring Tube Lining: PFA); Promag L (Measuring Tube Lining: Polyurethane, Hard Rubber); Promag L (Measuring Tube Lining: PTFE); Promag P (Measuring Tube Lining: PFA)

Technical data Promag 53 PROFIBUS DP/PA
166 Endress+Hauser
Promag H (measuring tube lining: PFA)
Promag L (Measuring tube lining: Polyurethane, Hard rubber)
Promag L (Measuring tube lining: PTFE)
Promag P (Measuring tube lining: PFA)
Nominal diameter Pressure tightness, measuring tube lining: limit values for
absolute pressure [mbar] ([psi]) at various fluid temperature
[mm] [inch]
25 °C 80° C 100 °C 130 °C 150 °C 180 °C
77 °F 176° F 212 °F 266 °F 302 °F 356 °F
2 to 100 1/12 to 4" 0 0 0 0 0 0
Nominal diameter Measuring
tube lining
Resistance of measuring tube lining to partial vacuum
Limit values for abs. pressure [mbar] ([psi]) at various fluid
temperatures
[mm] [inch]
25 °C 50 °C 80 °C
77 °F 122 °F 176 °F
25 to 1200 1 to 48" 25 to 1200 1 to 48" 0 –
350 to 2400 14 to 90" Hard rubber 0 0 0
Nominal diameter Resistance of measuring tube lining to partial vacuum
Limit values for abs. pressure [mbar] ([psi]) at various fluid temperatures
[mm] [inch]
25 °C 90 °C
77 °F 194 °F
[mbar] [psi] [mbar] [psi]
25 1" 0 0 0 0
32 – 0 0 0 0
40 1 ½" 0 0 0 0
50 2" 0 0 0 0
65 – 0 0 40 0.58
80 3" 0 0 40 0.58
100 4" 0 0 135 1.96
125 – 135 1.96 240 3.48
150 6" 135 1.96 240 3.48
200 8" 200 2.90 290 4.21
250 10" 330 4.79 400 5.80
300 12" 400 5.80 500 7.25
Nominal diameter Resistance of measuring tube lining to partial vacuum: limit values for
absolute pressure [mbar] ([psi]) at various fluid temperatures
[mm] [inch]
25 °C 80° C 100 °C 130 °C 150 °C 180 °C
77 °F 176° F 212 °F 266 °F 302 °F 356 °F
251"000000
32-000000
401 ½"000000
502"000000
65-0*0000
803"0*0000
1004"0*0000
125-0*0000
1506"0*0000