Technical data Promag 53 PROFIBUS DP/PA
168 Endress+Hauser
10.1.10 Mechanical construction
Design / dimensions
The dimensions and face-to-face length of the sensor and transmitter can be found in the
separate "Technical Information" documentation for each device which can be downloaded in
PDF format from www.endress.com. A list of available "Technical Information"
documentation can be found in the "Documentation" → 184 section.
Weight (SI units)
Promag E
Weight data in kg
Nominal
diameter
Compact version
EN (DIN) ASME JIS
[mm] [inch] PN 6 PN 10 PN 16 PN 40 Class 150 10K
15 ½" – – – 6.5 6.5 6.5
25 1" – – – 7.3 7.3 7.3
32 – – – – 8.0 – 7.3
40 1½" – – – 9.4 9.4 8.3
50 2" – – – 10.6 10.6 9.3
65–– –12.0– –11.1
80 3" – – 14.0 – 14.0 12.5
100 4" – – 16.0 – 16.0 14.7
125 – – – 21.5 – – 21.0
150 6" – – 25.5 – 25.5 24.5
200 8" – 45.0 46.0 – 45.0 41.9
250 10" – 65.0 70.0 – 75.0 69.4
300 12" – 70.0 81.0 – 110.0 72.3
350 14" 77.4 88.4 99.4 – 137.4 –
400 16" 89.4 104.4 120.4 – 168.4 –
450 18" 99.4 112.4 133.4 – 191.4 –
500 20" 114.4 132.4 182.4 – 228.4 –
600 24" 155.4 162.4 260.4 – 302.4 –
• Transmitter (compact version): 1.8 kg
• Weight data without packaging material
To Next Page
Loading...
