Identification Promag 53 PROFIBUS DP/PA
6 Endress+Hauser
2 Identification
2.1 Device designation
The flow measuring system consists of the following components:
• Promag 53 transmitter
• Promag E/H/L/P/W sensor
Two versions are available:
• Compact version: transmitter and sensor form a single mechanical unit.
• Remote version: transmitter and sensor are installed separately.
2.1.1 Nameplate of the transmitter
a0004554
Fig. 1: Nameplate specifications for the "Promag 53" transmitter (example)
1 Order code/serial number: Refer to the specifications on the order confirmation for the meanings of the individual letters and
digits.
2 Power supply/frequency/power consumption
3 Additional functions and software
4 Available inputs and outputs
5 Reserved for information on special products
6 Please refer to operating instructions / documentation
7 Reserved for certificates, approvals and for additional information on device version
8 Ambient temperature range
9 Degree of protection
1
9
8
2
4
5
3
Order Code:
Ser.No.:
TAG No.:
53P1H-XXXXXXXXXXXX
12345678901
ABCDEFGHJKLMNPQRST
20-55VAC/16-62VDC
IP67 / NEMA/Type 4X
-20°C (-4°F) < Tamb < +60°C (+140°F)
B
P
U S
R O IF
R
N12895
PROMAG 53
ii
PROFIBUS DP (Profile 3.0), STATUS-IN
f-OUT, I-OUT
EPD/MSU
ECC
Pat. US 5,323,156 5,479,007
Pat. US 4,382,387 4,704,908 5,351,554
Pat. UK 2 084 740 EP 219 725 EP 521 169
Pat. UK EP 541 878 EP 618 680
50-60Hz
15VA/W
6
7
To Next Page
Loading...
