Endress+Hauser PROline promag 53 - Device Drivers for Operating Programs

Promag 53 PROFIBUS DP/PA Operation
Endress+Hauser 75
5.5.3 Device drivers for operating programs
The following table illustrates the suitable device drivers for the operating tool in question
and then indicates where these can be obtained.
PROFIBUS DP
!
Note!
The Fieldcheck tester/simulator is used for testing flowmeters in the field. When used in
conjunction with the "FieldCare" software package, test results can be imported into a
database, printed and used for official certification. Contact your Endress+Hauser
representative for more information.
Valid for device software: 3.04.XX  DEVICE SOFTWARE function (8100)
PROFIBUS DP device data:
Profile Version:
Promag 53 ID No.:
Profile ID No.:
3.0
1526hex
9741hex
 PROFILE VERSION function (6160)
 DEVICE ID function (6162)
GSD file information:
Promag 53 GSD file: Extended Format
(recommended):
Standard Format:
eh3x1526.gsd
eh3_1526.gsd
!
Note!
Before configuring the PROFIBUS network, read and follow the
information for using the GSD file →  101
Bitmaps: EH_1526_d.bmp/.dib
EH_1526_n.bmp/.dib
EH_1526_s.bmp/.dib
Profile GSD file: PA039741.gsd
Software release: 07.2007
Operating program/Device driver: Sources for obtaining device drivers/program updates:
Promag 53 GSD file: • www.endress.com  Download
• www.profibus.com
• CD-ROM (Endress+Hauser order number: 56003894)
FieldCare/DTM • www.endress.com  Download
• CD-ROM (Endress+Hauser order number: 56004088)
• DVD (Endress+Hauser order number: 70100690)
SIMATIC PDM • www.endress.com  Download
Tester/simulator:
Device: How to acquire:
Fieldcheck • Update by means of FieldCare via Fieldflash module