Proline Promag 50H, 53H
42 Endress+Hauser
Welding nipple according to
ODT/SMS
1.4404 (316L)
Sensor DN Fits to piping di G L H × B
5*H**-V*********** [mm] ODT/SMS [mm] [mm] [mm] [mm]
A0003871
2 to 8 12.7 × 1.65 9.0 12.7 16.1 62 × 42
15 19.1 × 1.65 16.0 19.1 16.1 62 × 42
25 (1" ANSI) 25.4 × 1.65 22.6 25.4 16.1 72 × 55
• Fitting length = (2 × L) + 86 mm
• Surface roughness: R
a
0.8 m
• If pigs are used for cleaning, it is essential to take the inside diameters
of measuring tube and process connection (di) into account!
Clamp according to ISO 2852, Fig. 2
1.4404 (316L)
Sensor DN Fits to
piping
Clamp ISO
2852, DN
di G L H × B
5*H**-W*********** [mm] ISO 2037 /
BS 4825-1
[mm] [mm] [mm] [mm] [mm]
A0005560
25
(1" ANSI)
Tube 24.5 ×
1.65
25 22.6 50.5 44.3 72 × 55
• Fitting length = (2 × L) + 86 mm
• Surface roughness: R
a
0.8 m
• If pigs are used for cleaning, it is essential to take the inside diameters
of measuring tube and process connection (di) into account!
Clamp according to
DIN 32676
1.4404 (316L)
Sensor DN Fits to piping di G L H × B
5*H**-0*********** [mm] EN 10357
(DIN 11850)
[mm] [mm] [mm] [mm]
A0005556
2 to 8 Tube 14 × 2
(DN 10)
10 34.0 41.0 62 × 42
15 Tube 20 × 2
(DN 15)
16 34.0 41.0 62 × 42
25 (DIN) Tube 30 × 2
(DN 25)
26 50.5 44.5 72 × 55
• Fitting length = (2 × L) + 86 mm
• Surface roughness: R
a
0.8 m
• If pigs are used for cleaning, it is essential to take the inside diameters
of measuring tube and process connection (di) into account!
Tri-Clamp for L14 AM7
1.4404 (316L)
Sensor DN Fits to piping di G L H × B
5*H**-1*********** [mm] OD [mm] [mm] [mm] [mm]
A0003872
2 to 8 Tube 12.7 × 1.65
(OD ½")
9.4 25.0 28.5 62 × 42
15 Tube 19.1 × 1.65
(ODT ¾")
15.8 25.0 28.5 62 × 42
25 (1" ANSI) Tube 25.4 × 1.65
(ODT 1")
22.1 50.4 28.5 72 × 55
• Fitting length = (2 × L) + 86 mm
• Surface roughness: R
a
0.8 m
• If pigs are used for cleaning, it is essential to take the inside diameters
of measuring tube and process connection (di) into account!
To Next Page
Loading...
