Endress+Hauser Proline Promag 53H - Measuring Tube Specifications; Material

Proline Promag 50H, 53H
Endress+Hauser 59
Measuring tube
specifications
Material • Transmitter housing:
– Compact housing: powder coated die-cast aluminum or stainless-steel field housing (1.4301
(304))
– Wall-mounted housing: powder coated die-cast aluminum
• Window material: glass or polycarbonate
• Sensor housing: stainless steel 1.4301 (304)
• Wall mounting kit (holder panel): 1.4301 (304)
• Measuring tube: stainless steel 1.4301 (304)
• Lining material: PFA (USP Class VI; FDA 21 CFR 177.1550; 3A)
•Flanges:
– All connections 1.4404 (316L)
– Flanges (EN (DIN), ANSI, JIS) made of PVDF
– Adhesive fitting made of PVC
• Ground rings: 1.4435 (316L)(optional: Alloy C-22, Tantalum)
•Electrodes:
– Standard: 1.4435 (316L)
– Optional: Alloy C-22, Tantalum, Platinum (up to DN 25 / 1" only)
•Seals:
– DN 2 to 25 (¹⁄ to 1"): O-Ring (EPDM, Viton, Kalrez), gasket seal (EPDM*, Viton, Silicone*)
– DN 40 to 150 (1½ to 6"): gasket seal (EPDM*, Silicone*)
* = USP Class VI; FDA 21 CFR 177.2600; 3A
Nominal diameter Pressure rating
1)
Internal diameter
2)
EN (DIN) PFA
[mm] [inch] [bar] [mm] [inch]
2¹⁄" PN 16 / PN 40 2.25 0.09
4¹⁄" PN 16 / PN 40 4.5 0.18
8³⁄" PN 16 / PN 40 9.0 0.35
15 ½" PN 16 / PN 40 16.0 0.63
– 1" PN 16 / PN 40 22.6 0.89
25 – PN 16 / PN 40 26.0 1.02
40 1½" PN 16 / PN 25 / PN 40 35.3 1.39
50 2" PN 16 / PN 25 / PN 40 48.1 1.89
65 – PN 16 / PN 25 / PN 40 59.9 2.36
80 3" PN 16 / PN 25 / PN 40 72.6 2.86
100 4" PN 16 / PN 25 / PN 40 97.5 3.84
125 – PN 10 / PN 16 120.0 4.72
150 6" PN 10 / PN 16 146.5 5.77
1)
Pressure rating depends on the process connection and the seals used.
2)
Internal diameter of process connections.