Endress+Hauser Proline Promag L 400 - Calling up Remedial Measures

Proline Promag L 400 PROFIBUS DP Diagnostics and troubleshooting
Endress+Hauser 103
Diagnostic behavior
Symbol Meaning
A0013961
Alarm
• Measurement is interrupted.
• Signal outputs and totalizers assume the defined alarm condition.
• A diagnostic message is generated.
• The background lighting changes to red.
A0013962
Warning
Measurement is resumed. The signal outputs and totalizers are not affected. A diagnostic
message is generated.
Diagnostic information
The fault can be identified using the diagnostic information. The short text helps you by
providing information about the fault. In addition, the corresponding symbol for the
diagnostic behavior is displayed in front of the diagnostic information on the local display.
Operating elements
Key Meaning
A0013970
Plus key
In a menu, submenu
Opens the message about the remedial measures.
A0013952
Enter key
In a menu, submenu
Opens the operating menu.
12.3.2 Calling up remedial measures
X X X X X X XX X X X X X X X XX X
S
S
XX
20.50
X
i
S801
Menu
S
(ID:203)
S801 0d00h02m25s
1
2
4
6
3
5
Increase supply voltage
S801 Supply voltage
Diagnostic list
Diagnostics 1
Diagnostics 2
Diagnostics 3
Supply voltage
Supply voltage
A0013940-EN
 31 Message for remedial measures
1 Diagnostic information
2 Short text
3 Service ID
4 Diagnostic behavior with diagnostic code
5 Operation time of occurrence
6 Remedial measures