Endress+Hauser Proline Promag L 400 - 12.11.1 Function Scope of Device Reset Parameter; 12.12 Device Information

Diagnostics and troubleshooting Proline Promag L 400 PROFIBUS DP
114 Endress+Hauser
‣
Administration
‣
Define access code
Define access code
Confirm access code
Device reset
Parameter overview with brief description
Parameter Description Selection Factory setting
Device reset Restart or reset device manually. • Cancel
• To delivery settings
• Restart device
Cancel
12.11.1 Function scope of "Device reset" parameter
Options Description
Cancel No action is executed and the user exits the parameter.
To delivery settings Every parameter for which a customer-specific default setting was ordered is reset
to this customer-specific value. All other parameters are reset to the factory
setting.
Restart device The restart resets every parameter whose data are in the volatile memory (RAM)
to the factory setting (e.g. measured value data). The device configuration remains
unchanged.
History reset Every parameter is reset to its factory setting.
12.12 Device information
The Device information submenu contains all the parameters that display different
information for identifying the device.
Navigation
"Diagnostics" menu → Device information
‣
Device information
Device tag
Serial number
Firmware version
Device name
Order code