Endress+Hauser Proline Promag W 400 - Measuring System; Safety

Proline Promag W 400
Endress+Hauser 5
Measuring system
The device consists of a transmitter and a sensor.
Two device versions are available:
• Compact version - the transmitter and sensor form a mechanical unit.
• Remote version – the transmitter and sensor are mounted separately from one another.
Transmitter
Promag 400 Device versions and materials
• Compact version: compact housing
– Polycarbonate plastic
– Coated aluminum AlSi10Mg
• Remote version: wall-mount housing
– Polycarbonate plastic
– Coated aluminum AlSi10Mg
Configuration:
• External operation via four-line, illuminated local display with touch
control and guided menus ("Make-it-run" wizards) for applications
• Via operating tools (e.g. FieldCare)
• Via Web browser (e.g. Microsoft Internet Explorer)
• Also for device version with EtherNet/IP output:
– Via Add-on Profile Level 3 for automation system from Rockwell
Automation
– Via Electronic Data Sheet (EDS)
A0017117
Sensor
Promag W Nominal diameter range: DN 25 to 2000 (1 to 78")
Materials:
• Sensor housing: coated aluminum AlSi10Mg, carbon steel with
protective varnish
• Sensor connection housing: coated aluminum AlSi10Mg, polycarbonate
• Measuring tube: stainless steel 1.4301 (304), 1.4306 (304L); for
flanges made of carbon steel with Al/Zn protective coating or
protective varnish
• Liner: hard rubber, polyurethane
• Seals: as per DIN EN 1514-1
• Electrodes: 1.4435 (304L), Alloy C22, tantalum
• Ground disks: 1.4435 (316L), Alloy C22, tantalum
Fixed flange: DN 25 to 300 (1 to
12")
A0017040
Fixed flange: DN 350 to 2000 (14
to 78")
A0017041
Safety IT security
We only provide a warranty if the device is installed and used as described in the Operating
Instructions. The device is equipped with security mechanisms to protect it against any inadvertent
changes to the device settings.
IT security measures in line with operators' security standards and designed to provide additional
protection for the device and device data transfer must be implemented by the operators themselves.
Endress+Hauser can be contacted to provide support in performing this task.