Endress+Hauser Proline Promag W 400 - Transmitter Nameplate

Incoming acceptance and product identification Proline Promag W 400 EtherNet/IP
14 Endress+Hauser
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• The chapters "Additional standard documentation on the device" →  8 and
"Supplementary device-dependent documentation" →  8
• The W@M Device Viewer: Enter the serial number from the nameplate
(www.endress.com/deviceviewer)
• The Endress+Hauser Operations App: Enter the serial number from the nameplate or
scan the 2-D matrix code (QR code) on the nameplate.
4.2.1 Transmitter nameplate
Order code:
i
Ext. ord. cd.:
Ser. no.:
Patents
i
Date:
1
2
3 4 5 6 7
8
9
10
111213
A0017346
 2 Example of a transmitter nameplate
1 Manufacturing location
2 Name of the transmitter
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Permitted ambient temperature (T
a
)
7 Firmware version (FW) and device revision (Dev.Rev.) from the factory
8 Degree of protection
9 Permitted temperature range for cable
10 2-D matrix code
11 Manufacturing date: year-month
12 CE mark, C-Tick
13 Electrical connection data, e.g. available inputs and outputs, supply voltage