Endress+Hauser Proline Promag W 400 - Page 90

Commissioning Proline Promag W 400 EtherNet/IP
90 Endress+Hauser
Totalizer operation mode
Failure mode
Parameter overview with brief description
Parameter Description Selection Factory setting
Assign process variable Select process variable for totalizer. • Off
• Volume flow
• Mass flow
Volume flow
Unit totalizer Select process variable totalizer unit. Unit choose list l
Totalizer operation mode Select totalizer calculation mode. • Net flow total
• Forward flow total
• Reverse flow total
Net flow total
Failure mode Define totalizer behavior in alarm condition. • Stop
• Actual value
• Last valid value
Stop