Endress+Hauser Proline Promag W 800 - Page 116

Technical data Proline Promag W 800
116 Endress+Hauser
Process connections
For flanges made of carbon steel:
• DN ≤ 300 (12"): with Al/Zn protective coating or protective varnish
• DN ≥ 350 (14"): protective varnish
All carbon steel lap joint flanges are supplied with a hot-dip galvanized finish.
EN 1092-1 (DIN 2501)
Fixed flange
• Carbon steel:
• DN ≤ 300: S235JRG2, S235JR+N, P245GH, A105, E250C
• DN 350 to 900: P245GH, S235JRG2, A105, E250C
• Stainless steel:
• DN ≤ 300: 1.4404, 1.4571, F316L
• DN 350 to 600: 1.4571, F316L, 1.4404
• DN 700 to 900: 1.4404, F316L
Lap joint flange
• Carbon steel DN ≤ 300: S235JRG2, A105, E250C
• Stainless steel DN ≤ 300: 1.4306,1.4404, 1.4571, F316L
Lap joint flange, stamped plate
• Carbon steel DN ≤ 300: S235JRG2 similar to S235JR+AR or 1.0038
• Stainless steel DN ≤ 300: 1.4301 similar to 304
ASME B16.5
Fixed flange, lap joint flange
Carbon steel: A105
JIS B2220
Carbon steel: A105, A350 LF2
AS 2129
Carbon steel: A105, E250C, P235GH, P265GH, S235JRG2
AS 4087
Carbon steel: A105, P265GH, S275JR
Seals
As per DIN EN 1514-1, form IBC
Accessories
Ground disks
• Stainless steel, 1.4435 (316L)
• Alloy C22, 2.4602 (UNS N06022)
Fitted electrodes Measurement, reference and empty pipe detection electrodes available as standard with:
• 1.4435 (316L)
• Alloy C22, 2.4602 (UNS N06022)