Endress+Hauser Proline Promag W 800 - Page 31

Proline Promag W 800 Mounting procedure
Endress+Hauser 31
For immersion in water, Proline 800 - Standard
The SmartBlue app cannot be used if the device is immersed in water, as Bluetooth
connectivity will not be available.
NOTICE
If the maximum water depth and operating duration is exceeded, this can damage the
device!
‣
Observe the maximum water depth and operating duration.
Order code "Sensor option", option CT "IP68, type 6P, 168h/3m (10 ft)"
• For use of device under rain or surface water
• Use at a maximum water depth of 3 m (10 ft) for 168 h
For immersion in water, Proline 800 - Advanced
• Only the remote version of the device with IP68 protection, type 6P is suitable for
underwater use: order code for "Sensor option", options CB, CC, CD, CE and CQ.
• Pay attention to regional installation instructions.
NOTICE
If the maximum water depth and operating duration is exceeded, this can damage the
device!
‣
Observe the maximum water depth and operating duration.
Order code for "Sensor option", options CB, CC
• For the operation of the device under water
• Operating duration at a maximum depth of:
• 3 m (10 ft): permanent use
• 10 m (30 ft): maximum 48 hours
Order code for "Sensor option", option CQ "IP68, type 6P, factory encapsulation"
• For permanent use of device under rain or surface water
• Use at a maximum water depth of 3 m (10 ft)
Order code for "Sensor option", options CD, CE
• For the operation of the device under water and in saline water
• Operating duration at a maximum depth of:
• 3 m (10 ft): permanent use
• 10 m (30 ft): maximum 48 hours
≤ ≤
3 ( 10)
A0042412
 4 Installation for permanent immersion in water