Endress+Hauser Proline Promag W 800 - Mounting the Transmitter of the Remote Version, Proline 800 - Advanced

Mounting procedure Proline Promag W 800
38 Endress+Hauser
Nominal diameter Screws Max. screw tightening torque [Nm]
[mm] [mm] HR PUR
375 12 × M24 137 –
400 12 × M24 226 –
450 12 × M24 301 –
500 16 × M24 271 –
600 16 × M27 393 –
700 20 × M27 330 –
750 20 × M30 529 –
800 20 × M33 631 –
900 24 × M33 627 –
Abbreviations (liner): HR = hard rubber, PUR = polyurethane
Nominal screw tightening torques
Nominal screw tightening torques for JIS B2220
Nominal diameter Pressure rating Screws Nom. screw tightening torque [Nm]
[mm] [bar] [mm] HR PUR
350 10K 16 × M22 109 109
20K 16 × M30×3 217 217
400 10K 16 × M24 163 163
20K 16 × M30×3 258 258
450 10K 16 × M24 155 155
20K 16 × M30×3 272 272
500 10K 16 × M24 183 183
20K 16 × M30×3 315 315
600 10K 16 × M30 235 235
20K 16 × M36×3 381 381
700 10K 16 × M30 300 300
750 10K 16 × M30 339 339
Abbreviations (liner): HR = hard rubber, PUR = polyurethane
6.2.4 Mounting the transmitter of the remote version, Proline 800 -
Advanced
L
CAUTION
Ambient temperature too high!
Danger of electronics overheating and housing deformation.
‣
Do not exceed the permitted maximum ambient temperature. →  28
‣
If operating outdoors: Avoid direct sunlight and exposure to weathering, particularly in
warm climatic regions.
L
CAUTION
Excessive force can damage the housing!
‣
Avoid excessive mechanical stress.