Endress+Hauser Proline Promag W 800 - Page 41

Proline Promag W 800 Mounting procedure
Endress+Hauser 41
6.
7.
A0044273
6. Push the display module down gently at the hinge.
7. Pull the display module out of the holder.
A0043338
8. Disconnect the plug of the electronics module.
T10
1 Nm
(0.7 lbf ft)
A0042853
9. Release the screws on the electronics module.
A0042843
10. Remove the electronics module.