Endress+Hauser Proline Promag W 800 - Pin Assignment, Proline 800 - Standard

Electrical connection Proline Promag W 800
46 Endress+Hauser
7.2.3 Pin assignment, Proline 800 - Standard
Pin Function
A PSO1+ (pulse/status output 1+)
B COM (reference potential pulse/status outputs)
C NC (not connected)
D Earth
E RS485_+ (Modbus B)
F RS485_- (Modbus A)
G PSO3+ (pulse/status output 3+)
H PSO2+ (pulse/status output 2+)
J NC (not connected)
K NC (not connected)
Connection methods
available
Possible options for order code
Outputs
Pin "Electrical connection"
Option E: MIL-DTL-26482 plug

The connector solution on the Promag 800 with standard transmitter
ensures IP68 protection in both the plugged-in and disconnected state on the
socket side. This plastic connector solution is fully compatible with MIL-
DTL-26482 Series I. Mixing it with MIL-DTL-26482 Series I (metal) and the
plastic version does not ensure compliance with the IP68, type 6P protection
class.