Endress+Hauser Proline Promag W 800 - Inserting and Connecting the Battery Pack

Electrical connection Proline Promag W 800
58 Endress+Hauser
7.4.2 Inserting and connecting the battery pack
The device is delivered either with the batteries already installed, or enclosed
separately, depending on national standards and guidelines. If the batteries are
inserted and connected upon delivery, it is important to ensure that switch "B" is set to
"ON" in order to operate the device.
1 → 2 →
¼
1.
2.
A0046655 A0046656
‣
Turn the cover to the right by a 1/4 turn.
‣
Lift off the cover.
3 → 4 →
1.
2.
A B
A0046658 A0046591
‣
Open the cover of the electronics carrier.
‣
Set switch "B" to "ON".
5 → 6 →
3.
2.
1.
A0046733 A0046744
‣
Insert the battery plug and place the cable in the recess of the battery
carrier as shown in the graphic. Place the battery in the battery
compartment.
‣
Close the cover of the
electronics carrier.