Endress+Hauser Proline Promag W 800 - Connecting the pressure sensor, Proline 800 - Advanced

Proline Promag W 800 Electrical connection
Endress+Hauser 61
8 → 9 →
A0043732 A0043733
‣
Insert battery packs 1 and 2.
‣
Plug the connector of battery pack 1 into connector 1.
‣
Plug the connector of battery pack 2 into connector 2.
‣
The device switches on.
‣
After 15 seconds, a measured value appears on the display.
10 → 11 → 12
2.
1.
T20
ON
ON
1
2
T20
1.
2.
2.5 Nm
(1.8 lbf ft)
A0043736 A0043737 A0042855
‣
Mount the cover of the battery
pack.
‣
Close the display module.
‣
Close the connection
compartment cover.
7.6 Connecting the pressure sensor, Proline 800 -
Advanced
A
B
A0044314
A Plug for the pressure sensor on the housing of the compact transmitter
B Plug for the pressure sensor on the housing of the remote transmitter
‣
Connect the pressure sensor to the plug indicated.