Endress+Hauser Proline Promag W 800 - Power supply via the external battery pack, Proline 800 - Advanced

Electrical connection Proline Promag W 800
62 Endress+Hauser
7.7 Power supply via the external battery pack, Proline
800 - Advanced
7.7.1 Connecting the external battery pack
A
A0044313
A Plug for the external battery pack
‣
Connect the external battery pack to the plug indicated.
7.7.2 Inserting batteries into the external battery pack
L
WARNING
Batteries may explode if not handled properly!
‣
Do not recharge batteries.
‣
Do not open batteries.
‣
Do not expose batteries to naked flame.
Observe the specified temperature range of the batteries.
1 → 2 → 3
T20
2.
1.
T20
1.
2.
2.5 Nm
(1.8 lbf ft)
A0042984 A0044283 A0043783
‣
Open the connection
compartment cover.
‣
Insert new batteries.
‣
Close the connection
compartment cover.
The device does not display the remaining capacity of the external batteries. The value
on the display refers exclusively to the batteries fitted internally. If internal and
external batteries are connected, the external batteries are used first of all, and then
the internal batteries are used.