Endress+Hauser Proline Promag W 800 - Page 67

Proline Promag W 800 Operation options
Endress+Hauser 67
3. Select the device from the Live List.
 The Login dialog box opens.
• For energy-saving reasons, if the device is not powered by a power unit, it is only
visible in the live list for 10 seconds every minute.
• The device appears immediately in the live list if the local display is touched for 5
seconds.
• The device with the highest signal strength appears at the very top of the live list.
Logging in:
4. Enter the user name: admin
5. Enter the initial password: serial number of the device, (pay attention to lower/upper
case).
 When you log in for the first time, a message is displayed advising you to change
the password.
6. Confirm your entry.
 The main menu opens.
7. Optional: Change Bluetooth® password: System → Connectivity → Bluetooth
configuration → Change Bluetooth password
Forgotten your password: contact Endress+Hauser Service.