Endress+Hauser Proline Promass 80 - Identification; Device designation; Nameplate of the transmitter

Device Functions Proline Promass 80 3 Group SYSTEM UNITS
Endress+Hauser 9
UNIT VOLUME FLOW Use this function to select the unit for the volume flow.
The unit you select here is also valid for:
• Current output
• Frequency output
• Switching points (limit value for volume flow, flow direction)
• Low flow cut off
Options:
Metric:
Cubic centimeter
→ cm
3
/s; cm
3
/min; cm
3
/h; cm
3
/day
Cubic decimeter
→ dm
3
/s; dm
3
/min; dm
3
/h; dm
3
/day
Cubic meter
→ m
3
/s; m
3
/min; m
3
/h; m
3
/day
Milliliter
→ ml/s; ml/min; ml/h; ml/day
Liter
→ l/s; l/min; l/h; l/day
Hectoliter
→ hl/s; hl/min; hl/h; hl/day
Megaliter
→ Ml/s; Ml/min; Ml/h; Ml/day
US:
Cubic centimeter
→ cc/s; cc/min; cc/h; cc/day
Acre foot
→ af/s; af/min; af/h; af/day
Cubic foot
→ ft
3
/s; ft
3
/min; ft
3
/h; ft
3
/day
Fluid ounce
→ oz f/s; oz f/min; oz f/h; oz f/day
Gallon
→ gal/s; gal/min; gal/h; gal/day
Kilo gallon
→ Kgal/s; Kgal/min; Kgal/h; Kgal/day
Million gallon
→ Mgal/s; Mgal/min; Mgal/h; Mgal/day
Barrel (normal fluids: 31.5 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Barrel (beer: 31.0 gal/bbl)
→bbl/s; bbl/min; bbl/h; bbl/day
Barrel (petrochemicals: 42.0 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Barrel (filling tanks: 55.0 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Imperial:
Gallon
→ gal/s; gal/min; gal/h; gal/day
Mega gallon
→ Mgal/s; Mgal/min; Mgal/h; Mgal/day
Barrel (beer: 36.0 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Barrel (petrochemicals: 34.97 gal/bbl)
→ bbl/s; bbl/min; bbl/h; bbl/day
Factory setting:
Country dependent (m
3
/h or US Mgal/day)
UNIT VOLUME Use this function to select the unit for the volume.
The unit you select here is also valid for:
• Pulse value (e.g. m
3
/p)
Options:
Metric
→ cm
3
; dm
3
; m
3
; ml; l; hl; Ml
US
→ cc; af; ft
3
; oz f; gal; Kgal; Mgal; bbl (normal fluids); bbl (beer);
bbl (petrochemicals); bbl (filling tanks)
Imperial
→ gal; Mgal; bbl (beer); bbl (petrochemicals)
Factory setting:
Country dependent (m
3
or US Mgal)
! Note!
The unit for the totalizer is independent of your choice here, it is selected separately in
the TOTALIZER 1/2 function group (see Page 20).
Function description SYSTEM UNITS