10 Technical data PROline Promass 80
100 Endress+Hauser
10.1.9 Human interface
Display elements • Liquid crystal display: illuminated, two lines with 16 characters per line
• Selectable display of different measured values and status variables
• At ambient temperatures below –20 °C the readability of the display may be impaired.
Operating elements
• Local operation with push buttons (–, +, E)
• Quick Setup menus for straightforward commissioning
Language group Language groups for operation in different countries:
• Western Europe and America:
English, German, Spanish, Italian, French, Dutch and Portuguese
• Northern/eastern Europe:
English, Russian, Polish, Norwegian, Finnish, Swedish and Czech
• Southern/eastern Asia:
English, Japanese and Indonesian
Remote operation
• Operation by means of HART protocol
10.1.10 Certificates and approvals
Ex approvals Information about currently available Ex versions (ATEX, FM, CSA) can be supplied by
your E+H Sales Centre on request. All explosion protection data are given in a separate
documentation which is available upon request.
Sanitary
compatibility • 3A authorization (all measuring systems, except Promass H)
• EHEDG-tested (Promass A and Promass I only)
Pressure device approval European Pressure Equipment Directive 97/23/EC (PED)
Functional safety SIL 2:
accordance IEC 61508/IEC 61511-1 (FDIS)
CE mark The measuring system is in conformity with the statutory requirements of the EC
Directives. Endress+Hauser confirms successful testing of the device by affixing to it
the CE mark.
Other standards and
guidelines
EN 60529:
Degrees of protection by housing (IP code)
EN 61010:
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and
Laboratory Procedures.
EN 61326/A1 (IEC 1326):
Electromagnetic compatibility (EMC requirements)
NAMUR NE 21/43:
Association for Standards for Control and Regulation in the Chemical Industry
10.1.11 Ordering information
The E+H service organisation can provide detailed ordering information and information
on specific order codes on request.
To Next Page
Loading...
