Endress+Hauser Proline Promass 80 - 10.14 Dimensions: Promass I

10 Technical data PROline Promass 80
146 Endress+Hauser
10.14 Dimensions: Promass I
Dimensions Promass I: flange connections EN (DIN), ANSI, JIS
Fig. 80: Dimensions Promass I: flange connections EN (DIN), ANSI, JIS
Flange EN 1092-1 (DIN 2501) / PN 40: 1.4301/304, parts in contact with medium titanium grade 9
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 6.3...12.5
µm
DN A B C G L N S LK U di
8
1)
350 291 59 95 402 4 x Ø14 20 65 17.30 8.55
15 350 291 59 95 438 4 x Ø14 20 65 17.30 11.38
15
2)
350 291 59 95 572 4 x Ø14 19 65 17.07 17.07
25 350 291 59 115 578 4 x Ø14 23 85 28.50 17.07
25
2)
377 305 72 115 700 4 x Ø14 22 85 25.60 25.60
40 377 305 72 150 708 4 x Ø18 26 110 43.10 25.60
40
2)
406 320 86 150 819 4 x Ø18 24 110 35.62 35.62
50 406 320 86 165 827 4 x Ø18 28 125 54.50 35.62
1)
DN 8 with DN 15 flanges as standard
2)
DN 15, 25, 40 “FB” = Full bore versions of Promass I
Flange EN 1092-1 (DIN 2501) / PN 63: 1.4301/304, parts in contact with medium titanium grade 9
Surface roughness (flange): EN 1092-1 Form B2 (DIN 2526 Form E), Ra 1.6...3.2
µm
DN A B C G L N S LK U di
50 406 320 86 180 832 4 x Ø22 34 135 54.5 35.62
Flange EN 1092-1 (DIN 2501) / PN 100: 1.4301/304, parts in contact with medium titanium grade 9
Surface roughness (flange): EN 1092-1 Form B2 (DIN 2526 Form E), Ra 1.6...3.2
µm
DN A B C G L N S LK U di
8
1)
350 291 59 105 402 4 x Ø14 25 75 17.30 8.55
15 350 291 59 105 438 4 x Ø14 25 75 17.30 11.38
15
2)
350 291 59 105 578 4 x Ø14 26 75 17.07 17.07
25 350 291 59 140 578 4 x Ø18 29 100 28.50 17.07
25
2)
377 305 72 140 706 4 x Ø18 31 100 25.60 25.60
40 377 305 72 170 708 4 x Ø22 32 125 42.50 25.60
40
2)
406 320 86 170 825 4 x Ø22 33 125 35.62 35.62
50 406 320 86 195 832 4 x Ø26 36 145 53.90 35.62
1)
DN 8 with DN 15 flanges as standard
2)
DN 15, 25, 40 “FB” = Full bore versions of Promass I
F06-80Ixxxxx-06-00-xx-xx-000