Endress+Hauser Proline Promass 80 - Page 148

10 Technical data PROline Promass 80
148 Endress+Hauser
Flange JIS B2238 / 10K: 1.4301/304, parts in contact with medium titanium grade 9
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C G L N S LK U di
50 406 320 86 155 827 4 x Ø19 28 120 50 35.62
Flange JIS B2238 / 20K: 1.4301/304, parts in contact with medium titanium grade 9
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C G L N S LK U di
8
1)
350 291 59 95 402 4 x Ø15 20 70 15.00 8.55
15 350 291 59 95 438 4 x Ø15 20 70 15.00 11.38
15
2)
350 291 59 95 572 4 x Ø15 19 70 17.07 17.07
25 350 291 59 125 578 4 x Ø19 23 90 25.00 17.07
25
2)
377 305 72 125 700 4 x Ø19 22 90 25.60 25.60
40 377 305 72 140 708 4 x Ø19 26 105 40.00 25.60
40
2)
406 320 86 140 819 4 x Ø19 24 105 35.62 35.62
50 406 320 86 155 827 8 x Ø19 28 120 50.00 35.62
1)
DN 8 with DN 15 flanges as standard
2)
DN 15, 25, 40 “FB” = Full bore versions of Promass I
Flange JIS B2238 / 40K: 1.4301/304, parts in contact with medium titanium grade 9
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C G L N S LK U di
8
1)
350 291 59 115 402 4 x Ø19 25 80 15.00 8.55
15 350 291 59 115 438 4 x Ø19 25 80 15.00 11.38
15
2)
350 291 59 115 578 4 x Ø19 26 80 17.07 17.07
25 350 291 59 130 578 4 x Ø19 27 95 25.00 17.07
25
2)
377 305 72 130 706 4 x Ø19 29 95 25.60 25.60
40 377 305 72 160 708 4 x Ø23 30 120 38.00 25.60
40
2)
406 320 86 160 825 4 x Ø23 31 120 35.62 35.62
50 406 320 86 165 827 8 x Ø19 32 130 50.00 35.62
1)
DN 8 with DN 15 flanges as standard
2)
DN 15, 25, 40 “FB” = Full bore versions of Promass I
Flange JIS B2238 / 63K: 1.4301/304, parts in contact with medium titanium grade 9
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C G L N S LK U di
8
1)
350 291 59 120 402 4 x Ø19 28 85 12.00 8.55
15 350 291 59 120 438 4 x Ø19 28 85 12.80 11.38
15
2)
350 291 59 120 578 4 x Ø19 29 85 17.07 17.07
25 350 291 59 140 578 4 x Ø23 30 100 22.00 17.07
25
2)
377 305 72 140 706 4 x Ø23 32 100 25.60 25.60
40 377 305 72 175 708 4 x Ø25 36 130 35.00 25.60
40
2)
406 320 86 175 825 4 x Ø25 37 130 35.62 35.62
50 406 320 86 185 832 8 x Ø23 40 145 48.00 35.62
1)
DN 8 with DN 15 flanges as standard
2)
DN 15, 25, 40 “FB” = Full bore versions of Promass I