PROline Promass 80 10 Technical data
Endress+Hauser 99
Process connections, Promass A:
• Mounting set for flanges EN 1092-1 (DIN 2501) / ANSI B16.5 / JIS B2238 → stainless
steel 1.4539/904L,
Alloy C-22 2.4602/N 06022. Loose flanges
→ stainless steel 1.4404/316L
• VCO coupling → stainless steel 1.4539/904L, Alloy C-22 2.4602/N 06022
• Tri-Clamp (1/2") → stainless steel 1.4539/904L
• Mounting set for SWAGELOK (1/4", 1/8") → stainless steel 1.4401/316
• Mounting set for NPT-F (1/4") → stainless steel 1.4539/904L,
Alloy C-22 2.4602/N 06022
Process connections, Promass H:
• Flanges EN 1092-1 (DIN 2501) / ANSI B16.5 / JIS B2238 → stainless steel 1.4301/304,
parts in contact with medium: zirconium 702
Process connections, Promass I:
• Flanges EN 1092-1 (DIN 2501) / ANSI B16.5 / JIS B2238 → stainless steel 1.4301/304,
parts in contact with medium: titanium grade 9
• Flange DIN 11864-2 Form A (flat flange) → titanium grade 2
• Hygienic coupling DIN 11851 / SMS 1145 → titanium grade 2
• Couplings ISO 2853 / DIN 11864-1 → titanium grade 2
• Tri-Clamp → titanium grade 2
Measuring tube(s):
• Promass F:
– DN 8...100: stainless steel 1.4539 (904L)
– DN 150: stainless steel 1.4404/316L
– DN 8...80: Alloy C-22 2.4602/N 06022
• Promass M:
– DN 8...50: titanium grade 9
– DN 80: titanium grade 2
• Promass M (high pressure version): titanium grade 9
• Promass E: stainless steel 1.4539/904L
• Promass A: stainless steel 1.4539/904L, Alloy C-22 2.4602/N 06022
• Promass H: zirconium 702/R 60702
• Promass I: titanium grade 9
Seals:
• Promass F: welded process connections without internal seals
• Promass M: Viton, EPDM, silicon, Kalrez, FEP-jacketed (not for gas applications)
• Promass E: welded process connections without internal seals
• Promass A: Viton, EPDM, silicon, Kalrez
• Promass H: welded process connections without internal seals
• Promass I: welded process connections without internal seals
Material load diagram The material load curves (pressure-temperature diagrams) for the process connections
are to be found in the following documents:
• Technical Information Promass 80/83 F, M (TI 053D/06/en)
• Technical Information Promass 80 E (TI 061D/06/en)
• Technical Information Promass 80/83 A (TI 054D/06/en)
• Technical Information Promass 80/83 H, I (TI 052D/06/en)
Process connections
• see Page 98 ff.
To Next Page
Loading...
