Endress+Hauser Proline Promass E TB2 HART - 4.2 Product identification

Proline Promass E TB2 HART Incoming acceptance and product identification
Endress+Hauser 13
4.2 Product identification
The following options are available for identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
•
Enter serial numbers from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All information about the measuring device is displayed.
For an overview of the scope of the Technical Documentation provided, refer to the following:
•
The chapters "Additional standard documentation on the device" (® ä 5) and "Supplementary
device-dependent documentation" (® ä 5)
•
The W@M Device Viewer : Enter the serial number from the nameplate
(www.endress.com/deviceviewer)
4.2.1 Nameplates
Transmitter
Ordercode:
Ext.ord.cd.:
Ser.no.:
Date:
i
i
Patents
322540-0001
1
2
3 4 5
6
7
8
9
10 11
12
14
15
16
17
13
A0013906
å 2 Example of a transmitter nameplate
1
Manufacturing location
2 Name of the transmitter
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Electrical connection data, e.g. available inputs and outputs, supply voltage
7 Type of cable glands
8 Permitted ambient temperature (T
a
)
9 Firmware version (FW) and device revision (Dev.Rev.) from the factory
10 CE mark, C-Tick
11 Additional information about the transmitter version (certificates, approvals), e.g. SIL, PROFIBUS
12 Permitted temperature range for cable
13 Manufacturing date: year-month
14 Degree of protection: e.g. IP, NEMA
15 Approval information for explosion protection
16
Document number of safety-related supplementary documentation, e.g. Safety Instructions (® ä 5)
17 2-D matrix code