Endress+Hauser Proline Promass E TB2 HART - Page 14

Incoming acceptance and product identification Proline Promass E TB2 HART
14 Endress+Hauser
Sensor
Date:
K-factor: Size:
Materials:
Tm:
Patents
i
ptest=
i
Ordercode:
Ext.ord.cd.:
Ser.no.:
322541-0000
0044
12
1
2
3 4 5 6 7
13
8
9
10
14 15 16
17
18
20
19
11
A0013907
å 3 Example of a sensor nameplate
1 Manufacturing location
2 Name of the sensor
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Nominal diameter of the sensor
7 Test pressure of the sensor
8 Calibration factor
9 Flange nominal diameter/nominal pressure
10 Material of measuring tube and manifold
11 Fluid temperature range
12 CE mark, C-Tick
13 Additional information about the sensor version (certificates, approvals), e.g. EHEDG, 3-A
14 Manufacturing date: year-month
15 Flow direction
16 2-D matrix code
17 Degree of protection: e.g. IP, NEMA
18 Approval information for explosion protection and Pressure Equipment Directive
19 Permitted ambient temperature (T
a
)
20
Document number of safety-related supplementary documentation, e.g. Safety Instructions (® ä 5)
Order code
The measuring device is reordered using the order code.
Extended order code
• The device type (product root) and basic specifications (mandatory features) are always listed.
• Of the optional specifications (optional features), only the safety and approval-related
specifications are listed (e.g. LA). If other optional specifications are also ordered, these are
indicated collectively using the # placeholder symbol (e.g. #LA#).
• If the ordered optional specifications do not include any safety and approval-related
specifications, they are indicated by the + placeholder symbol (e.g. 8E2B50-ABCDE+).