Endress+Hauser Proline Promass F 100 - Page 111

Proline Promass F 100 Modbus RS485 Technical data
111
Device plug
Electrical connection Material
Plug M12x1 • Socket: Stainless steel, 1.4404 (316L)
• Contact housing: Polyamide
• Contacts: Gold-plated brass
Sensor housing
• Acid and alkali-resistant outer surface
• DN 08 to DN 150: stainless steel, 1.4301 (304)
Optional: order code for "Sensor option", option CC: stainless steel, 1.4404 (316L)
• DN 250:
– Order code for "Measuring tube material", option SA, SD (stainless steel, 1.4404
(316L)):
Stainless steel 1.4301 (304)
Optional: order code for "Sensor option", option CC: stainless steel, 1.4404 (316L)
– Order code for "Measuring tube material", option HA, TH (Alloy C22):
Stainless steel, 1.4404 (316L)
Measuring tubes
• DN 8 to 100 (3/8…4"): stainless steel, 1.4539 (904L);
Manifold: stainless steel, 1.4404 (316/316L)
• DN 150 (6"), DN 250 (10"): stainless steel, 1.4404 (316/316L);
Manifold: stainless steel, 1.4404 (316/316L)
• DN 8 to 250 (3/8 to 10"): Alloy C22, 2.4602 (UNS N06022);
Manifold: Alloy C22, 2.4602 (UNS N06022)
Process connections
• Flanges according to EN 1092-1 (DIN2501) / according to ASME B 16.5 /
as per JIS B2220:
– Stainless steel, 1.4404 (F316/F316L)
– Alloy C22, 2.4602 (UNS N06022)
– Lap joint flanges: stainless steel, 1.4301 (F304); wetted parts Alloy C22
• All other process connections:
Stainless steel, 1.4404 (316/316L)
List of all available process connections →  112
Seals
Welded process connections without internal seals
Safety Barrier Promass 100
Housing: Polyamide