Endress+Hauser Proline Promass F 100 - Operability

Technical data Proline Promass F 100 Modbus RS485
112
Process connections • Fixed flange connections:
– EN 1092-1 (DIN 2501) flange
– EN 1092-1 (DIN 2512N) flange
– Namur lengths in accordance with NE 132
– ASME B16.5 flange
– JIS B2220 flange
– DIN 11864-2 Form A flange, DIN 11866 series A, flange with notch
• Clamp connections
Tri-Clamp (OD tubes), DIN 11866 series C
• Thread:
– DIN 11851 thread, DIN 11866 series A
– SMS 1145 thread
– ISO 2853 thread, ISO 2037
– DIN 11864-1 Form A thread, DIN 11866 series A
• VCO connections
– 8-VCO-4
– 12-VCO-4
For information on the different materials used in the process connections
Surface roughness All data relate to parts in contact with fluid. The following surface roughness quality can
be ordered.
• Not polished
• Ra
max
= 0.8 µm (32 µin)
• Ra
max
= 0.4 µm (16 µin)
16.11 Operability
Service interface Via service interface (CDI)
Modbus RS485
1
2
3
A0030216
1 Service interface (CDI) of measuring device
2 Commubox FXA291
3 Computer with "FieldCare" operating tool with COM DTM "CDI Communication FXA291"