Endress+Hauser Proline Promass F 100 - Page 51

Proline Promass F 100 Modbus RS485 System integration
51
Data area
Device parameter value Modbus RS485 register Data type* Access**
Start register End register
(Float only)
Value of scan list register ... ... ... ... ...
Value of scan list register 15 5081 5082 Integer/float Read/write
* Data type depends on the device parameters entered in the scan list.
** Data access depends on the device parameters entered in the scan list. If the device parameter entered
supports read and write access, the parameter can also be accessed via the data area.