Endress+Hauser Proline Promass F 100 - Page 71

Proline Promass F 100 Modbus RS485 Operation
71
Navigation
"Diagnostics" menu → Measured values → Measured variables
‣
Measured variables
Mass flow
→  71
Volume flow
→  71
Corrected volume flow
→  71
Density
→  71
Reference density
→  72
Temperature
→  72
Pressure value
→  72
Concentration
→  72
Target mass flow
→  72
Carrier mass flow
→  72
Parameter overview with brief description
Parameter Prerequisite Description User interface
Mass flow – Displays the mass flow currently
measured.
Dependency
The unit is taken from the Mass flow
unit parameter (→  54).
Signed floating-point
number
Volume flow – Displays the volume flow currently
calculated.
Dependency
The unit is taken from the Volume flow
unit parameter (→  54).
Signed floating-point
number
Corrected volume flow – Displays the corrected volume flow
currently calculated.
Dependency
The unit is taken from the Corrected
volume flow unit parameter
(→  54).
Signed floating-point
number
Density – Shows the density currently measured.
Dependency
The unit is taken from the Density unit
parameter (→  54).
Signed floating-point
number