Proline Promass F 100 Modbus RS485 Diagnostics and troubleshooting
85
12.9.3 Overview of information events
Unlike a diagnostic event, an information event is displayed in the event logbook only and
not in the diagnostic list.
Info number Info name
I1000 --------(Device ok)
I1089 Power on
I1090 Configuration reset
I1091 Configuration changed
I1110 Write protection switch changed
I1111 Density adjust failure
I1151 History reset
I1209 Density adjustment ok
I1221 Zero point adjust failure
I1222 Zero point adjustment ok
I1444 Device verification passed
I1445 Device verification failed
I1446 Device verification active
I1447 Record application reference data
I1448 Application reference data recorded
I1449 Recording application ref. data failed
I1450 Monitoring off
I1451 Monitoring on
I1457 Failed:Measured error verification
I1459 Failed: I/O module verification
I1460 Failed: Sensor integrity verification
I1461 Failed: Sensor verification
I1462 Failed:Sensor electronic module verific.
12.10 Resetting the measuring device
Using theDevice reset parameter (→ 67) it is possible to reset the entire device
configuration or some of the configuration to a defined state.
12.10.1 Function scope of the "Device reset" parameter
Options Description
Cancel No action is executed and the user exits the parameter.
To fieldbus defaults Every parameter is reset to fieldbus default values.
To Next Page
Loading...
