Endress+Hauser Proline Promass I 100 - Environment

Proline Promass I 100 Modbus RS485 Technical data
Endress+Hauser 85
Dependent on the flow:
• Flow in % o.f.s. ≥ (zero point stability : base accuracy in % o.r.) · 100
– Maximum measured error in % o.r.: ±base accuracy in % o.r.
– Repeatability in % o.r.: ±½ · base accuracy in % o.r.
• Flow in % o.f.s. < (zero point stability : base accuracy in % o.r.) · 100
– Maximum measured error in % o.r.: ± (zero point stability : measured value) · 100
– Repeatability in % o.r.: ±½ · (zero point stability : measured value) · 100
Base accuracy for [% o.r.]
Mass flow, liquids 0.1
Volume flow, liquids 0.1
Mass flow, gases 0.5
16.7 Installation
"Mounting requirements" (  17)
16.8 Environment
Ambient temperature
range
(  19)
Storage temperature –40 to +80 °C (–40 to +176 °F), preferably at +20 °C (+68 °F)
Climate class DIN EN 60068-2-38 (test Z/AD)
Degree of protection Transmitter and sensor
• As standard: IP66/67, type 4X enclosure
• With the order code for "Sensor options", option CM: IP69K can also be ordered
• When housing is open: IP20, type 1 enclosure
Safety Barrier Promass 100
IP20
Shock resistance As per IEC/EN 60068-2-31
Vibration resistance Acceleration up to 1 g, 10 to 150 Hz, based on IEC/EN 60068-2-6
Interior cleaning • SIP cleaning
• CIP cleaning
Electromagnetic
compatibility (EMC)
• As per IEC/EN 61326 and NAMUR Recommendation 21 (NE 21)
• Complies with emission limits for industry as per EN 55011 (Class A)
Details are provided in the Declaration of Conformity.