Endress+Hauser Proline Promass I 300 - Page 108

Commissioning Proline Promass I 300 PROFINET
108 Endress+Hauser
Parameter Prerequisite Description Selection / User
interface / User
entry
Factory setting
Assign frequency output The Frequency option is
selected in the Operating
mode parameter (→  105).
Select process variable for
frequency output.
• Off
• Mass flow
• Volume flow
• Corrected volume
flow
• Target mass flow
*
• Carrier mass flow
*
• Target volume
flow
*
• Carrier volume
flow
*
• Target corrected
volume flow
*
• Carrier corrected
volume flow
*
• Density
• Reference density
• Concentration
*
• Dynamic viscosity
*
• Kinematic
viscosity
*
• Temp.
compensated
dynamic viscosity
*
• Temp.
compensated
kinematic
viscosity
*
• Temperature
• Carrier pipe
temperature
*
• Electronic
temperature
• Oscillation
frequency 0
• Oscillation
frequency 1
*
• Oscillation
amplitude 0
*
• Oscillation
amplitude 1
*
• Frequency
fluctuation 0
*
• Frequency
fluctuation 1
*
• Oscillation
damping 0
*
• Oscillation
damping 1
*
• Oscillation
damping
fluctuation 0
*
• Oscillation
damping
fluctuation 1
*
• Signal asymmetry
*
• Exciter current 0
*
• Exciter current 1
*
• HBSI
*
• Pressure
• Application
specific output 0
*
• Application
specific output 1
*
• Index
inhomogeneous
medium
–