Endress+Hauser Proline Prowirl 73 - Page 20

Proline Prowirl 73 F, W
20 Endress+Hauser
Dimensions of flow conditioner according to EN (DIN)/ANSI/JIS
F06-7xxxxxxx-06-00-06-xx-001
Flow conditioner according to EN (DIN)/ANSI/JIS, material 1.4435 (316L)
Table: dimensions of flow conditioner
Weight • Weight of Prowirl 73 W → see dimension table on Page 15.
• Weight of Prowirl 73 F → see dimension tables on Page 16 ff.
• Weight of flow conditioner according to DIN/ANSI/JIS → see dimension table on Page 20.
Material • Transmitter housing:
Powder-coated die-cast aluminium
•Sensor:
– Flanged and wafer version.3
Stainless steel, A351-CF3M (1.4404), in conformity with NACE MR 0175
• Flanges:
– EN (DIN) → Stainless steel, A351-CF3M (1.4404), in conformity with NACE MR 0175
(DN 15...150: as of 2005 changeover from fully cast construction to construction with
weld-on flanges in 1.4404)
– ANSI and JIS → Stainless steel, A351-CF3M, in conformity with NACE MR 0175
(DN 15...150, ½"...6": as of 2005 changeover from fully cast construction to construction
with weld-on flanges in 316/316L, in conformity with NACE MR 0175)
• DSC sensor (Differential Switched Capacitor; Capacitive Sensor):
Wetted parts (marked as “wet” on the DSC sensor flange):
– Standard for pressure rating up to PN 40, Cl 300, JIS 20K (excluding Dualsens version):
Stainless steel 1.4435 (316L), in conformity with NACE MR 0175
– Higher pressure rating and Dualsens-version (in preparation):
Inconel 2.4668/N 07718 (B637) (Inconel 718), conform to NACE MR 0175
• Non-wetted parts:
– Stainless steel, 1.4301 (CF3)
• Support:
– Stainless steel, 1.4308 (CF8)
•Seal:
– Graphite (Grafoil)
–Viton
– Kalrez 6375
– Gylon (PTFE) 3504
s
DN 15 /
½"
25 /
1"
40 /
1½"
50 /
2"
80 /
3"
100 /
4"
150 /
6"
200 /
8"
250 /
10"
300 /
12"
s [mm] 2.0 3.5 5.3 6.8 10.1 13.3 20.0 26.3 33.0 39.6
EN (DIN)
Weight in [kg]
PN 10 0.04 0.12 0.30 0.50 1.40 2.40 6.30 11.5 25.7 36.4
PN 16 0.04 0.12 0.30 0.50 1.40 2.40 6.30 12.3 25.7 36.4
PN 25 0.04 0.12 0.30 0.50 1.40 2.40 7.80 12.3 25.7 36.4
PN 40 0.04 0.12 0.30 0.50 1.40 2.40 7.80 15.9 27.5 44.7
PN 63 0.05 0.15 0.40 0.60 1.40 2.40 7.80 15.9 27.5 44.7
ANSI
Weight in [kg]
Cl. 150 0.03 0.12 0.30 0.50 1.20 2.70 6.30 12.3 25.7 36.4
Cl. 300 0.04 0.12 0.30 0.50 1.40 2.70 7.80 15.8 27.5 44.6
JIS
Weight in [kg]
10 K 0.06 0.14 0.31 0.47 1.1 1.8 4.5 9.2 15.8 26.5
20 K 0.06 0.14 0.31 0.47 1.1 1.8 5.5 9.2 19.1 26.5
40 K 0.06 0.14 0.31 0.50 1.3 2.1 6.2 - - -